To receive the stored channel, press MODE to select
[SX1], [SX2] or [SX3], then press a number button (1
to 6).
To set a parental control
The parental control feature allows you to limit
access to SiriusXM channels with mature content.
When enabled, the parental control feature requires
you to enter a passcode to tune to the locked
channels. Information on setting up the passcode
and locking channels can be found below.
1
Press MENU and rotate the control dial.
2
Select [GENERAL] [PARENTAL]
[LOCK SEL] [LOCK-ON].
3
Enter the passcode, then press ENTER.
The initial passcode is [0000].
To unlock the channels, select [OFF].
To change the passcode
1
Press MENU and rotate the control dial.
2
Select [GENERAL] [PARENTAL] [CODE EDIT].
3
Enter the current passcode on the current passcode
input display, then press ENTER.
The initial passcode is [0000].
4
Enter your new 4-digit passcode on the new
passcode input display, then press ENTER.
To change display items
Press and hold DSPL, then press it again to change
as follows:
Channel Number (Default) Channel Name Artist
Name Song Title Content Info Category Name
Clock
iTunes Tagging
With the iTunes Tagging feature, you can tag songs
you hear while listening to SiriusXM or HD Radio
stations.
Song information is saved to the unit until you
connect your iPod and then the song information is
transferred to your iPod. When your iPod is
connected to iTunes, you will then be able to
preview and purchase the songs that you heard
while listening to SiriusXM or HD Radio stations.
For details on compatible iPod models, see "About
iPod" (page 21).
For details on iTunes Tagging and the latest iTunes
Tagging compatible models, check the iTunes
website at -
http://www.apple.com/itunes/
For details on purchasing a song using "Tagged"
information, check the iTunes website at -
http://www.apple.com/support/itunes/
1
Press TAG when the TAG indicator is lit.
The TAG indicator lights up when song
information is broadcast on a SiriusXM or HD
Radio station. The TAG indicator blinks while
retrieving and saving the song information. The
song information is saved to the unit.
2
Connect an iPod to the USB port to
transfer the data.
If an iPod is already connected, the data will be
transferred immediately.
[TRANSFER] appears in the display and starts
blinking during the transfer.
3
Sync the iPod to your computer.
The songs will show up in a "Tagged" playlist in
iTunes.
Notes
If TAG is pressed right after the beginning of a song or
just before the end of a song, the unit may retrieve
the information of the previous or next song, in
addition to the current song.
The maximum number of tagged songs that you can
save to this unit is 50.
Once the tagged songs are transferred to the iPod,
they are erased from the unit automatically.
To delete all tagged songs before transfer
1
Press MENU, rotate the control dial to select
[GENERAL], then press it.
2
Rotate the control dial to select [TAG DEL], then
press it.
3
Rotate the control dial to select [YES], then press it.
11
GB