Introduction; Unpacking And Assembly; Using The Microscope - OPTIKA MICROSCOPES B-50 Manual De Instrucciones

Idiomas disponibles

2.0 INTRODUCTION

This microscope is a scientific precision instrument designed to last for many years with a minimum

of maintenance. It is built to high optical and mechanical standards and to withstand daily classroom

and laboratory use.

Optika reminds you that this manual contains important information on safety and maintenance, and

that it must therefore be made accessible to the instrument users.

Optika declines any responsibility deriving from instrument use that does not comply with this man-

ual.

3.1

The microscope is housed in a moulded Styrofoam container. Remove the tape from the

edge of the container and lift the top half of the container. Take some care to avoid that the

optical items (objectives and eyepieces) fall out and get damaged. Lift the microscope from

the container and put it on a stable desk.

4.1

Turn the observation head to a comfortable position for observation.

4.2

Ensure that the specimen is centred over the stage opening. Lock the specimen slide on the

mechanical stage using the two slide clamps.

4.3

The microscope comes with an electrical illuminator. Insert the plug of the external power

supply into the power socket on the back of the microscope and turn on the light by rotating

the knob under the condenser.

4.4

Rotate the coarse focusing knob to bring the slide into focus with the 4X objective. Adjust the

fine focusing knob to get the image sharp and clear.

4.5

Turn the nosepiece to choose the objective you need.

Page 4

Tabla de Contenido