Battery Check; Attach The Beeper Locator To A Collar Strap; Regular Maintenance - SportDOG DSL-400-19 Manual De Funcionamiento

BATTERY CHECK

With the unit turned ON (
double beep indicates good battery. A long, low-volume beep indicates low battery.
ATTACH THE BEEPER LOCATOR TO A COLLAR STRAP
The Beeper Locator attaches to the included collar strap by sliding the strap
through the Beeper Locator's brackets. It will also fit most other sporting-style
collar straps with dimensions no larger than 0.254 cm thick x 2.54 cm wide. To
attach, remove one or both of the Compartment Lids and thread the collar strap
though the brackets. Position the Beeper Locator behind your dog's head. If you are
adding the Beeper Locator to a training collar strap, position the training collar's
Receiver directly under the dog's neck.

REGULAR MAINTENANCE

• Use a damp cloth and mild soap for cleaning. Do not use harsh abrasives or
solvents because these products will damage the casing.
• Routinely check the tightness of each Compartment Lid.
• If the volume of the beep becomes noticeably low, check or replace the battery.
• When not in use, turn the Battery Compartment Lid to the OFF position (
battery does not need to be removed.
NOTE: You may hear a light rattling sound. This is normal and is part of the
motion-sensor switch.
), adjust the Left Mode Switch to 4. A quick, high-volume
SPORTDOG.COM
). The
9