•
ensure that if the lanyard is to be used within a fall arrest system the free space required below is verified at the
workplace before each occasion of use, so that in the case of a fall, there will be no collision with the ground or other
obstacle in the fall path
•
ensure that when using a "Y" energy absorbing lanyard, that when one leg / lanyard is not
attached to the structure it must not be clipped back into the user's harness. Ideally, both
ends should stay attached to the structure at all times, or when one leg / lanyard is not in
use it is attached to the other leg that is attached.
ENGLISH
17