•
using only mild detergent
•
using only a sponge or soft nylon brush
•
using fresh clean water to rinse the detergent off the lanyard
•
drip dry the equipment
•
allowing the lanyard to thoroughly dry out before next use
•
ensure that the following cleaning methods are NOT used:
•
water over 40º C
•
bleach
•
any detergent not suitable for bare skin
•
wire brushes or other scouring agents
•
jet wash or other power products
•
radiators or other direct heat sources
•
ensure that a thorough visual and tactile examination of the lanyard is made after cleaning, before the
item is allowed to be re-used.
Before using disinfectants, you have to contact the manufacturer due to the complex legal product classifications based on
the specific applications and constituents.
•
ensure that the lanyard is stored in an area that is:
•
clean
•
free from airborne contaminates (e.g. dust or sand)
•
free from harmful chemicals (liquid or fumes)
•
dry
•
not in direct sunlight
•
not subject to extreme temperatures (below -15°C and above +50°C)
•
ensure that the lanyard is not stored under tension or load
•
store ideally in a purpose supplied bag box or cabinet
Please note: In order to prevent a negative impact on the safe function of the lanyard, it is only permitted to use accessories
approved by the manufacturer (e.g. rescue clamps to DIN 19428:2018, protective covers, etc.). The manufacturer is not
liable for any accidents involving the life and limb of the user if using non-approved accessories.
ENGLISH
Storage
Accessories
20