Playing Tracks In Random Order; Scanning Folders And Tracks; Pausing Playback; Using Compression And Bmx - Pioneer DEH-2100IB Manual De Instrucciones

Section
02 Operating this unit
! TRACK – Repeat the current track
! FOLDER – Repeat the current folder
# If you select another folder during repeat play,
the repeat play range changes to disc repeat.
# Performing track search or fast forward/re-
verse during TRACK (track repeat) changes the
repeat play range to disc/folder.
# When FOLDER (folder repeat) is selected, it is
not possible to play back a subfolder of that
folder.
# You can also perform this operation in the
menu that appears by using MULTI-CONTROL.

Playing tracks in random order

Tracks in a selected repeat range are played in
random order.
% Press 5/
Tracks play in a random order.
# To turn random play off, press 5/
# You can also perform this operation in the
menu that appears by using MULTI-CONTROL.

Scanning folders and tracks

Scan play searches the song within the se-
lected repeat range.
1 Use MULTI-CONTROL to select SCAN in
the function menu.
2 Press MULTI-CONTROL to turn scan play
on.
The first 10 seconds of each track is played.
3 When you find the desired track press
MULTI-CONTROL to turn scan play off.
# If the display has automatically returned to
the playback display, select SCAN again by using
MULTI-CONTROL.
# After scanning of a disc (folder) is finished,
normal playback of the tracks begins.

Pausing playback

1 Use MULTI-CONTROL to select PAUSE in
the function menu.
12
En
to turn random play on.
again.
2 Press MULTI-CONTROL to turn pause
on.
Playback of the current track pauses.
# To turn pause off, press MULTI-CONTROL
again.

Using compression and BMX

Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of this unit.
1 Use MULTI-CONTROL to select
COMP/BMX in the function menu.
2 Press MULTI-CONTROL to display the
setting mode.
3 Turn MULTI-CONTROL to select the de-
sired setting.
OFF—COMP 1—COMP 2—OFF—BMX 1—
BMX 2
4 Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been cancelled before
determination, operation is settled.

Playing songs on iPod

For details about the supported iPod, refer to
iPod compatibility on page 4.

Basic Operations

% Select a track (chapter)
Press c or d.
% Fast forward or reverse
Press and hold c or d.
Notes
! Read the precautions for iPod on page 25.
! While iPod is connected to this unit, PIONEER
(or (check mark)) is displayed on the iPod.
! If an error message is displayed, refer to Error
messages on page 23.