Rotary Laser; General Safety Instructions - LaserLiner BeamControl-Master Manual De Instrucciones

Read the operating instructions and the enclosed brochure „Guarantee and
!
additional notices" completely. Follow the instructions they contain. This document
must be kept in a safe place and if the laser device is passed on, this document
must be passed on with it.

Rotary laser

– Laser modes: spot, scan, rotary and hand receiver mode
– A special die-cast-zinc platform guarantees long-term stability
– All functions can be controlled remotely.
– SensoCommander 120: Laser receiver range up to 120 m radius
– Precision ± 0.2 mm / m

General safety instructions

– The device must only be used in accordance with its intended purpose and within
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut their eyes
and immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass, microscope,
– Do not use the laser at eye level (1.40 ... 1.90 m)
– In public areas shield off the laser beam with barriers and partitions wherever possible
and identify the laser area with warning signs.
– Tampering with (making changes to) the laser device is not permitted.
– This device is not a toy - keep out of the reach of children.
This product is a precision instrument that must be handled and treated with
!
care. Avoid shocks and impact. Always keep and carry in the case! Switch laser
off. For cleaning, use a soft cloth and glass cleaner.
12
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mw · 635 nm
EN 60825-1:2014