Features; Assembly - RIDGID JOBMAX B Serie Manual Del Operador

FEATURES

PRODUCT SPECIFICATIONS
Input ....................................................................................................................................... 120 V, AC only, 60 Hz, 3 Amps
Switch .................................................................................................................................. VSR (Variable Speed Reversible)
KNOW YOUR JOBMAX
See Figure 1, page 12.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
The power handle has a direction of rotation (forward/
reverse/center lock) selector located below the switch trigger
for changing the direction of bit rotation. Setting the direction
of rotation selector in the OFF (center lock) position will lock
the switch trigger to help reduce the possibility of accidental
starting when not in use.

ASSEMBLY

UNPACKING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have care-

fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
JobMax Power Handle
™
Drive Gear Cover
Operator's Manual
POWER HANDLE
™
LED LIGHT
The LED light, located above the switch trigger, illuminates
when the switch trigger is depressed. This provides extra
light for increased visibility.
TRIGGER SAFETY
The trigger will not operate the power handle unless an
accessory head is attached.
VARIABLE SPEED SWITCH TRIGGER
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
8 - English