Stihl KB-KW Manual De Instrucciones página 12

English
WARNING
The steeper the angle shown above, the
more difficult it is to control the tool.
1
Guide the bristle brush at right
N
angles to the direction of travel (1).
Sweepings are thrown forwards,
ahead of the operator.
WARNING
The bristle brush pushes back towards
the operator.
10
PowerSweep
The KW PowerSweep is used for
sweeping areas and paths, moving wet
materials, such a leaves or dirt, to a
central point, clearing snow and
removing standing water from solid
surfaces.
Push the PowerSweep steadily at
N
walking pace.
Always hold and guide the tool at a
N
shallow angle.
WARNING
The steeper the angle shown above, the
more difficult it is to control the tool.
1
Guide the PowerSweep at right
N
angles to the direction of travel (1).
Sweepings are thrown forwards,
ahead of the operator.
WARNING
The PowerSweep pushes back towards
the operator.
Cleaning the Sweeping Attachment
Clean away any dirt and debris that has
accumulated between the sweeping
attachments, around the gearbox or
between the sweeping attachments and
the deflector:
Shut off the engine.
–
Pull the hitch pins out of the axle.
–
Remove the sweeping attachments
–
from the axle and clean them.
Clean away dirt and debris from the
–
machine.
Refer to "Replacing the Sweeping
Attachments" for mounting instructions.
KB, KW