Replacing The Sweeping Attachments; Maintenance And Care - Stihl KB-KW Manual De Instrucciones

English
Replacing the Sweeping
Attachments
Bristle Brush
Removing
Remove the hitch pin (1) from the
N
end of the axle (2).
Pull the bristle brush (3) off the axle.
N
Installing
Push the bristle brush (3) onto the
N
axle.
Insert the hitch pin (1) in the hole at
N
the end of the axle and fold it flat.
Use the same procedure to mout
N
the other bristle brush.
WARNING
Always mount both bristle brushes.
18
PowerSweep
Removing
Remove the hitch pin (1) from the
N
end of the axle (2).
Pull the sweeper drum (3) off the
N
axle.
Installing
Push the sweeper drum (3) onto the
N
axle.
Insert the hitch pin (1) in the hole at
N
the end of the axle and fold it flat.
Use the same procedure to mout
N
the other sweeper drum.
WARNING
Always mount both sweeper drums.

Maintenance and Care

The following intervals apply to normal
operating conditions only. If your daily
working time is longer or operating
conditions are difficult (very dusty work
area, etc.), shorten the specified
intervals accordingly.
All accessible screws and nuts
Retighten if necessary
N
Sweeping attachments and deflectors
Visual inspection, check tightness
N
before starting work and after every
refueling stop
Replace if damaged
N
Safety labels
Replace illegible safety labels
N
KB, KW