Oase FishGuard Instrucciones De Uso página 11

Operating panel
Set mode: Press the Set button for 3 seconds to run through the program: Time > Feeding > Feeding
times. Flashing values can be changed and/or saved. When the time set at the beginning is displayed
again and no longer flashes, all settings are saved and the unit is ready for operation (operating mode).
Operating mode: Press the Set button briefly to dispense food outside the set times.
 F Description
1 Display
(numerical dis‐
play)
2 Set button
3 Socket
Function
Time display
Display of feeds
 Left‐hand number in the
display
 Right‐hand number in the
display
Display of feeding times
 1st feed
 2nd to 4th feed
Command button

Change settings

Command: Save the value
flashing in the display and
advance through the op‐
tions on the display.

Command: Immediately dis‐
pense food (extra feed).
For connecting a 6 V DC power supply unit. Not included. Not available
in North America, battery operated only
Value
00:00 ... 12:00 h AM/PM (standard) or
00:00 ... 24:00 h (changed)
1 ... 4, number of programmed feeds
0 ... 3, number of programmed rations ("0"
stands for no ration)
00:00 ... 12:00 h AM/PM or
00:00 ... 24:00 h
Accordingly
Keep the button pressed for 3 s.
Press the button briefly in Set mode.
Press the button briefly in operating mode.
‐ EN ‐
11