For The First Time - Fagor PL-120 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
SAFety WArNINGS
• Before using the appliance for
the first time, read this instruction
manual carefully and keep it for future
reference. Keep these instructions
throughout the life of the iron.
• Ensure that the domestic mains
voltage is the same as that indicated
on the appliance. Only connect the iron
to an AC supply.
• The electrical safety of this appliance
is only guaranteed if it is correctly
earthed. In case of doubt, contact a
professionally qualified technician.
• This appliance is for domestic use
only. Any other use will be considered
unsuitable or dangerous.
• Do not submerge this appliance in
water or other liquids. Do not fill it with
water under the tap.
• Keep the iron out of the reach of
children.
• This appliance reaches high
temperatures during use and there is
therefore a risk of burns. Always pick
up the appliance by its handle and
avoid any contact with the metal parts
and steam.
• Never pull on the cord to unplug the
appliance.
• Check the state of the cord. If it is
damaged and needs replacing, this
must only be done by an authorised
technical assistance service.
• Prevent the cord from coming into
contact with hot surfaces or the
surface of the iron itself.
• Unplug the iron before filling or
emptying the water tank. Stand the
iron vertically during pauses in ironing.
• If the iron is to be left unattended
after finishing ironing, even for a short
period of time:
– Turn the temperature dial to "MIN"
position
– Leave the iron in vertical position
– Unplug the iron from the mains
If the iron (or cord) needs to be
repaired for any reason, do not use
the appliance. Take it to an authorised
Technical Assistance Service for repair.
GB
• Repairs carried out by non-qualified
personnel may cause accidents or
damage to the user.
BeFore USING tHe IroN

For tHe FIrSt tIMe

• Remove all labels and protectors from
the soleplate and outer casing.
• Completely unwind and straighten the
supply cord.
1. DeSCrIptIoN
1. Spray nozzle
2. Fill hole
3. Function selector
4. Spray button
5. Extra steam button
6. Indicator light
7. Cord protector
8. Standing heel
9. Temperature dial
10. Stainless steel soleplate
2. FILLING tHe WAter tANK
• In hard water areas, we recommend
you use distilled water. Do not use
battery water or water with additives
such as starch, perfume, fabric
softeners, etc.
• Stand the iron horizontally and fill the
water tank. Do not exceed the "MAX"
level.
• Plug the iron into the mains and
select the temperature according to
the indications given on the label of
the clothes to be ironed. If you are
not sure about the composition of the
fabric to be ironed, start with a low
temperature and iron a hidden part of
the garment, gradually increasing the
temperature until the creases come
out without the fabric being damaged.
The temperature selector (9) is
marked with the following symbols:
MIN
Iron on
Synthetics, acrylics
••
Silk, rayon, wool
•••
Cotton/linen
MAX
Linen
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pl-140

Tabla de contenido