Filling The Water Tank; First-Time Use - Fagor PLC-804 Manual De Instrucciones

exists a danger of burns when using it.
For this reason, you must take hold of
the appliance by the handle and avoid
coming into contact with the metal
parts and steam.
•
Do not direct the jet of steam towards
people or animals because it is dangerous.
• Do not keep the iron resting on its base
while it is still hot. Wait until it cools
down.
•
Do not leave the appliance with water in
a place where the temperature is equal
to or less than 0ºC.
• In the event that the heat safety
limiter is triggered, the appliance will
cease to work normally. To switch it
back on, you must consult Technical
Support Services authorised by the
manufacturer.
• To avoid the danger of the appliance
overheating, we recommend completely
unwinding the electrical cable.
•
Do not submerge the appliance in water
or place it under a tap to add water.
•
Avoid moving the appliance when it is
being used.
• Do not block the ventilation/dissipation
grooves. Keep them free of dust and do
not insert any object into them.
•
The boiler has to be set on a stable,
flat, stiff surface which is resistant to
high temperatures. The appliance's four
feet must rest on the same surface.
• If you decide to not use the appliance
ever again, it is advisable to make it
unusable by cutting the power cable
after unplugging it.
• The iron must be used and rested on a
stable surface
•
When placing the iron on its stand,
ensure that the surface on which the
stand is placed is stable.
• The iron is not to be used if it has been
dropped, if there are visible signs of
damage or if it is leaking.
• Keep electrical appliances out of reach
from Children or infirm persons. Do not
let them use the appliances without
supervision.
•
The user must not leave the iron
unattended while it is connected to the
supply.
•
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or a similarly qualified
person in order to avoid a hazard.
•
The plug of the supply cord must be
removed from the socket-outlet before
the water reservoir is filled with water
•
The filling aperture must not be opened
during use. Instructions for the safe
refilling of the water reservoir shall be
given.
WARNING:
For your own safety, when you want to iron
using steam, before starting to iron, it is
necessary to wait until the steam indicator
(4) lights up. In the event that this indicator
should not light up, do not use the product
and contact an authorised after-sales
service centre.
3. FILLING THE WATER TANK
1. Wait until the appliance cools down
completely.
2. Turn off the on/off switch (2) and unplug
the appliance.
3. Remove the plug from the boiler (10).
(Fig. 2)
4. Fill the boiler up to the MAX level using
the funnel (11).
5. Replace the plug.
4. FIRST-TIME USE
1. Remove all of the protective film or labels
from the shoe and boiler if there are any.
2. Unwind and stretch out the steam tube
and mains cable.
3. Fill the boiler with tap water. (refer to
the "Filling the Boiler" section).
4. Plug the appliance into a suitable power
point.
5. Press the LED on/off switch (2).
6. Turn on the boiler switch (3).
7. Adjust the "steam level" to the
maximum level by turning the steam-
level control (5).
8. Turn the iron's temperature control (9) in
a clockwise direction until the maximum
10