Installation Site - Quick BXS 25 Manual Del Usuario

NAUTIC WATER HEATER
Our long experience operating in the nautical field has given us the means to supply a new series of
water heaters with innovative characteristics compared with other avaible heaters.
The advantages, given by Quick Nautic boilers, are:
• high quality of materials ensure the product is both reliable and long lasting.
• Heat exchanger with a large exchanging surface.
• Producing hot water also by means of an electric element, which is provided with an adjustable
and safety thermostat.
• Relief/non return valve that allows discharging of water heater in case of disuse.
• The installation is easy and practical on a flat area.
BEFORE USING THE WATER HEATER READ CAREFULLY THIS INSTRUCTION MANUAL.
IF IN DOUBT, PLEASE CONTACT THE NEAREST "QUICK" DEALER.
WARNING:
equipment for any other purposes. QUICK will not be held responsible for damage to equip-
ment and/or personal injuries cause by a misusage of the equipment.
PAKAGE CONTAINS:

INSTALLATION SITE

The water heater has to be placed in a dry and well-ventilated location. This precaution is required,
even though water heaters are made of sea environment resistant materials, since electrical systems
are present (in model provided with). Also if they are installed in environments that are not ventilated
condensation could occur. Condensation could be mistaken for a leak.
SET UP
• Fix water heater on flat plan, as shown in fig. 1, using suitable mountings for the weight of water
heater and for the type of installation site in the boat.
WARNING:
der to have the gross weight add to the empty weight, the water amount. (1 liter of water will
almost weigh 1 Kilogram)
• Make hydraulic connections, relating to the input and output of tap water and from the engine
cooling to the heat exchanger, as shown in fig. 2. Make the connections as short as possible
between engine cooling system and heat exchanger.
use this water heater in the applications described in this manual. Don't use the
water heater - user's manual - warranty card.
the weight of water heater/unit in technical data refers to the empty unit. In or-
INSTALLATION
GB
11