Inserting The Batteries; Care And Storage - Beurer BS 99 Instrucciones Para El Uso

4.2 Inserting the batteries

In order to use the cosmetics mirror, you first need to insert the supplied batteries. To insert the batteries, follow
the steps below:
1. R emove the battery compartment lid on the rear of the device.
2. I nsert the three supplied 1.5V AA (alkaline type LR6) batteries. Make sure
that the batteries are inserted with the correct polarity, according to the la­
bel. Do not use rechargeable batteries.
3. C lose the battery compartment lid carefully.
4.3 Operation
• The light can be switched on or off using the on/off switch located on the rear of the mirror.
• The light intensity can be adjusted by pressing the on/off switch again. There are three light intensity levels to
choose from.
T he light switches off automatically after 10 minutes.

5. Care and storage

WarnIng
• Disconnect the device before cleaning it.
• O nly clean the appliance in the manner specified. Fluid must never be allowed to enter into the device or
accessories.
• Do not use the device again until it is completely dry.
• Do not clean the device in the dishwasher.
• Do not use aggressive cleaning agents or hard brushes.
First unplug the device and allow it to cool off. Then you can clean it with a soft, slightly moistened cloth.
Then wipe it dry with a soft, lint-free cloth.
9
2
1