Chapter 2 Previdia216 Control Panel; Inside The Package - INIM Electronics PREVIDIA216 Manual De Instalación

Installation manual
Previdia216 Control Panel
The Previdia216 control panel is the base model of a Previdia Max system.
This model consists of a single cabinet with the following modules already installed:
• FPMCPU, front-plate module with main CPU unit
• IFM24160, internal power-supply module
• IFM2L, internal module for the management of two loops
The combination of these modules make the Previdia216 an analogue-addressable fire
detection panel capable of managing two loops which accommodate different types
of devices (detectors, input modules, outputs, call points, sounders, etc.).
This model can be expanded, by means of a combination of other modules installed
in accordance with system requirements.
The Previdia216R control panel is the same as Previdia216 but comes in a red cabinet.
2.1

Inside the package

Inside the box you will find:
• Metal cabinet containing a motherboard (FPMCPU module), power supply model (IFM24160), a 2-loop module
(IFM2L) and seals for the closure of the cable entries (already inserted).
• Installation manual
• Plastic bag containing:
- 2 resistors @ 1KOhm 1W
- 2 diodes @ 1A 1000V 1N4007
- 2 keys for access to user level 2
- wire for the connection of the battery to the power-supply unit with thermal probe
- battery to battery connection wire
- 4 screws for securing IFM modules to the grounding bar
- 2 ferrites
The batteries and programming software are not included in the package. These accessory items must be purchased
separately.
Previdia216 Control Panel
Chapter 2
23