Installation - Zuzi UV-VIS 4481/1 Manual De Instrucciones

5. INSTALLATION

Preliminary inspection
Unwrap the spectrophotometer UV-VIS 4481/1 Zuzi, take off the involving plastic and take off the
poliespan protection in which it comes fitted.
Please make sure that it does not present any damage because of the shipment. If it does please com-
municate to your transport agent or provider immediately, so that they can make the claims in the correct
time limit.
Note: We will only accept any equipment return within 15 days after delivery and provided it comes in
its original package and with all accessories and documents supplied.
Installation
Before using this instrument, it is convenient for you to familiarize with its components and basic essentials.
PLEASE READ THOROUGHLY THE INSTRUCTIONS BEFORE CONNECTING
AND OPERATING WITH THIS EQUIPMENT
Please put the spectrophotometer on top of a horizontal, plane and stable table making a free space at
least at 30 cm per side.
Do not put the spectrophotometer near any warm supply (burners, blowlamps...), nor expose it directly
to the sun, strong air, etc.
Room temperature between 5º C- 35 ºC, and relative humidity not higher than 85 %.
Avoid inflammable or corrosive substances in the working area.
The spectrophotometer is supplied with a Schuko standard wire
Please insert the wire that feeds the AC electric current in the base of current 220V±22V, 50Hz±1Hz pro-
vided with earth wire and to the other end to the spectrophotometer connector.
Neither the manufacturer nor the distributor will assume any responsibility for the damages produced
to the equipment during its installation or damages to persons suffered by the improper use of the elec-
tric connection. The tension should be 220V 50Hz ±10%.
If you are not using the spectrophotometer for a long period of time please make sure it is disconnec-
ted from the net and protected from dust (this way you will avoid accidents and will extend its working-
life).
Security
The spectrophotometer UV-VIS 4481/1 Zuzi must be used by previously qualified staff that knows how
the equipment works thanks to the user manual.
Follow all required applicable laws about safety and health (electrical security devices, inflammable,
toxic and/or pathological products, etc.).
During its functioning dangerous materials such as flammable or pathological substances must be out
of the safety area.
When you are not using the spectrophotometer for a long period of time please make sure it is unplug-
ged in order to avoid possible accidents.
It is essential to have the equipment switched off and unplugged from the net before cleaning, checking
components or replacing any piece (e.g. replacement of a fuse).
Never try to repair the spectrophotometer by yourself, since you will lose the warranty and may pro-
voke damages to the general operating system or the electrical installation, as well as injuries to the peo-
ple that usually handle the equipment (burns, hurts...).
Manual de instrucciones 54481001 Pág. 28 Version 1 December 2015