Dear Customer
Before using the appliance, the user must
read the following instructions carefully.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
Make sure that the supply voltage
corresponds with the voltage marked on the
rating label. This product complies with all
binding CE labelling directives.
Familiarisation
1.
Main indicator light I
2.
On/Off button (I/0)
3.
Timer programming button (PROG)
4.
LCD display
5.
Minute set button (M)
6.
Indicator lamp (AUTO)
7.
Hour set button (H)
8.
Power cord with plug (at the rear)
9.
Glass carafe
10. Lid for glass carafe
11. Swing-out filter with removable filter
insert
12. Water level indicator
13. Water container
14. Lid for water container
Important safety instructions
●
Before the appliance is used, the main
body including the power cord as well as
any attachment fitted should be checked
thoroughly for any defects. Should the
appliance, for instance, have been
dropped onto a hard surface, it must not
be used any longer: even invisible
damage may have adverse effects on the
operational safety of the appliance.
●
During operation, the coffee maker must
be placed on a level, non-slip surface,
impervious to splashes and stains.
●
Do not allow the appliance or its power
Coffee Maker
cord to touch hot surfaces or to come
into contact with any heat sources.
●
Do not leave the appliance unattended
while in use.
●
The hot-plate becomes very hot during
operation.
●
To prevent the danger of hot water or
steam being emitted, always switch off
the coffee maker and allow sufficient
time for the appliance to cool down
before it is opened or any accessories or
attachments are removed.
●
Once the water container has been filled
with water, ensure that the filter and the
glass carafe have been correctly fitted to
the appliance. If the appliance is witched
on accidentally, this will prevent the hot
water from being emitted in an
uncontrolled way.
●
It is possible for the function of the
appliance to be interrupted by a nearby
source of electrostatic discharge.
However, once this is removed, it will
operate normally again.
●
Always switch off the appliance after use.
●
Always remove the plug from the wall
socket
- in case of any malfunction,
- if the appliance is not being used for an
extended period of time.
- during cleaning,
Each time the appliance is reconnected
to the mains power, the internal clock
must be re-set.
●
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
●
Do not allow the power cord to hang
free; the cord must be kept well away
from hot parts of the appliance.
●
This appliance is not intended for use by
any person (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
8