CU 3800
• Do not immerse the motor unit in water nor rinse it
under the tap.
• Always place the appliance on a flat, stable surface.
Special Safety Instructions
• Attention, the cutting blades are extremely sharp!
Handle with extreme care when using the appliance
and when cleaning the blades!
• Warning! The blades are very sharp. Before inserting
or removing the blades, always remove the mains
plug.
• Do not leave the knife unattended when it is ready
to operate.
• Do not cut any deep frozen food or bones with the
normal knife.
• Do not operate the knife for more than 5 minutes
without a break.
PUTTING THE DEVICE INTO OPERATION
Remove the motor device and the accessories from the box. Also remove any packaging
•
materials that may be present.
Wipe all the parts with a moist cloth to remove all the dust that may have deposited on and in
•
the device during transport. Then mount the device again by proceeding in the opposite order.
WARNING: Please be particularly careful when handling the blades. There is a danger of injury. Only
hold the blades as near to the ends as possible or by the plastic handling surfaces.
Assemble the blades as shown in illustration 1.
•
11