The Footswitch - Stryker iSwitch Manual De Operación Y Mantenimiento

The Footswitch

The footswitch rests on the operating-room floor and provides foot control of all
devices connected to the iSwitch system. The footswitch houses three buttons
and two pedals, which enable the user to alternate between operating-room
devices and perform device-specific functions. When a button or pedal is pressed,
the footswitch transmits a radio signal to the receiver, where the command is then
routed to the appropriate device.
The footswitch and its features are described in Figure 1 below.
6
5
Figure 1: The footswitch
1.
Footswitch Handle
2. Button II (Mode Button): Selects which device the footswitch will
control. See the "System Settings" section of this manual for Mode
options.
Note Button/pedal function for all other buttons and pedals depends
on which operating-room device, or "mode, " is selected. See the
"Using the footswitch controls" section in this manual for device-
specific button functions.
3. Button III
4. Pedal B
5. Pedal A
6. Button I
5
1
2
3
4