Spraying Precautions - Campbell Hausfeld VT6195 Instrucciones De Funcionamiento Y Manual De Piezas

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Important Safety Information (Continued)
Never use plastic (PVC) pipe for compressed air. Serious injury or death could
result.
Never attempt to repair or modify a tank! Welding, drilling or any other modification will
weaken the tank resulting in damage from rupture or explosion. Always replace worn, cracked
or damaged tanks.
Drain liquid from tank daily.
Tanks rust from moisture build-up, which weakens the tank. Make sure to drain tank regularly and
inspect periodically for unsafe conditions such as rust formation and corrosion.
Fast moving air will stir up dust and debris which may be harmful. Release air slowly when draining
moisture or depressurizing the compressor system.

Spraying Precautions

Do not spray flammable materials in vicinity of open flame or near ignition sources including
the compressor unit.
Do not smoke when spraying paint, insecticides, or other flammable substances.
Use a face mask/respirator when spraying and spray in a well ventilated area to prevent health and fire
hazards.
Do not direct paint or other sprayed material at the compressor. Locate compressor as far away from
the spraying area as possible to minimize overspray accumulation on the compressor.
When spraying or cleaning with solvents or toxic chemicals, follow the instructions provided by the
chemical manufacturer.
The DANGER, WARNING, CAUTION, and NOTICE notifications and instructions in this manual
cannot cover all possible conditions and situations that may occur. It must be understood by the
operator that caution is a factor which cannot be built into this product, but must be supplied by the
operator.
Save These Instructions
Do Not Discard
4

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vt6395

Tabla de contenido