Housing Removal; Figure 12: Housing Removal Procedure - Astralpool ASTRAL CDP Serie Manual Técnico. Puesta En Marcha Y Funcionamiento

8.1 HOUSING REMOVAL

The removal of the unit's housing, to proceed with the various maintenance procedures, is to be
carried following these steps:
Starting on the initial position of the unit,
proceed to remove the two side screws
(1) & (2) that attach the housing:
(1)
Then proceed to raise the housing to
release the closure of form at the top:
© ASTRALPOOL 2008. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
(2)

Figure 12: Housing removal procedure.

Then proceed to tilt the housing as shown
in figure:
Finally, extract the housing:
ENGLISH
Page 56 of 69