Operating The Generator; Basic Notes On Operation - Dometic TEC40D Instrucciones De Uso

Operating the generator

Displays
No. in
fig. 3,
Description
page 4
6 AC supply
7 Constant output
8 Operating hours
9 DC voltage
10 Messages
8 Operating the generator
A
NOTICE!
Do not run the generator over 70 % of the maximum constant output for
the first 50 operating hours (run-in phase).
I
NOTE
Run the generator at a maximum of approx. 75 % of the maximum con-
tinuous load after the run-in phase.
By doing this you can prolong the service life of the generator and
maximise its efficiency.
8.1

Basic notes on operation

!
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the intake
grille.
14
Actual voltage output
Current capacity of connected consumer
Time the generator is in operation
Battery voltage
Status reports of the generator (see chapter
"Display messages" on page 16)
TEC40D
EN