Operating The Generator; Basic Notes On Operation; Switching The Generator To Standby Or No Function - Dometic ePower T Instrucciones De Montaje

All manuals and user guides at all-guides.com
ePower T, ePower T LPG
9

Operating the generator

9.1

Basic notes on operation

!
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the
intake grille.
Please note the following basic information:
 Always check the oil level before use (chapter "Checking the oil level" on
page 38).
 ePower T LPG only: Check there are no leaks from the liquid gas supply
using a leak detection spray before every use.
 Even small overloads in the long-run will cause the fuses to trigger.
 If you are not using your generator for a longer period of time, start it up
at least every 10 days and leave it running for 15 minutes or more.
9.2

Switching the generator to standby or no function

➤ Set the main switch (fig. 4 1, page 4) in the connection box to:
– "0": the generator is switched to no function (in this position the
generator can be adjusted and serviced)
– "1": the generator is switched to standby (in standby the generator can
be started by the eCore)
I
NOTE
The eCore can be set to automatically start the ePower T
generator.
9.3 Operating the generator
I
NOTE
You find detailed information about operating the generator in the
operating manual of the eCore.
EN
Operating the generator
37