Care And Cleaning - Hamilton Beach Professional M47 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22

Care and Cleaning

w WARNING
Electrical Shock Hazard.
Disconnect power before cleaning. Do not immerse mixer, cord, or plug in any liquid.
1. Always unplug mixer from electrical outlet and eject the attachments before cleaning.
2. Soft scrape beaters, wire whisk, dough hooks and optional attachments are dishwasher-safe or wash in hot, soapy water. Rinse and dry.
The Storage Case, mixer body and cord are NOT dishwasher-safe.
To clean, wipe with a clean, damp cloth.
NOTE: Do not use abrasive cleaners or scouring pads. To reduce the risk of electrical shock, do not immerse the mixer body in water at any time.
Troubleshooting
The motor works very slowly.
• Too many ingredients in the bowl. Remove some ingredients and restart.
• The speed dial is set too low. Set the speed dial to higher speed.
The motor does not work.
• The power plug is not plugged into the wall outlet, or the circuit breaker is tripped. Plug into outlet and check function of outlet.
• The hand mixer is not turned on. Move speed dial to desired speed.
• The motor stops during operation due to overheating, unplug and allow it to cool down for 15 minutes. Plug machine back in after 15
minutes to resume normal operation.
• The motor is damaged. Call our customer service department.
The beaters stop rotating.
• This mixer has a safety feature when it detects a heavy load (no rotation). To reset, turn control knob to
• Too many ingredients in the bowl. Remove some ingredients and restart.
(OFF).
7

Publicidad

Tabla de contenido
loading

Tabla de contenido