Package Contents; Description Of The Product; Activate/Deactivate The Collar - EYENIMAL STATIC NOBARK COLLAR Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USER'S GUIDE

• Package contents

a1 STATIC NOBARK COLLAR fitted with nylon strap and short contact points
a1 Lithium 3-V CR2 battery
a1 neon test lamp
a1 pair of long contact points
athis user's guide

• Description of the product

Diagram 1
Battery cover

• Activate/Deactivate the collar

Activate: as soon as the battery is in place, the collar is ready for use.
To fit the battery in the collar, proceed in the following way:
aUnscrew the battery cover using a coin.
aInsert the battery paying attention to follow polarity indicated on the collar (ref. Diagram 1).
aRetighten the battery cover using a coin. A beep sound is emitted indicating the collar is ready for use. If you do not
hear any beep sound when retightening the battery cover, remove the battery immediately from its housing. Check the
polarity before trying again.
Deactivate: If you wish to turn off the collar, you should remove the battery from its housing.
To increase the battery life, we recommend you to deactivate the collar if you are not using it for a long period.
• Operation
After setting up the battery, the collar remains on standby for 30 seconds to allow you time to fix the collar on your dog.
bark, a beep sound is emitted.
At the 1
st
If a 2
bark is detected within 30 seconds, a beep sound and a low static correction of short duration are emitted.
nd
If a 3
bark is detected within 30 seconds, a beep sound and a low static correction of long duration are emitted.
rd
bark is detected within 30 seconds, a beep sound and a strong static correction of short duration are emitted.
If a 4
th
If a 5
bark is detected within 30 seconds, a beep sound and a strong static correction of long duration are emitted.
th
If your dog stops barking during 30 seconds, at the next bark, the collar will start its operating cycle from the beginning (beep
sound only). After being activated 5 times in quick succession, the collar will automatically go into safety mode for 2 minutes
before restarting itself normally.
UIDE STATIC NOBARK COLLAR indice B.indd 3
UIDE STATIC NOBARK COLLAR indice B.indd 3
Contact points
Bark detection
(short or long)
contact point
Battery polarity indicator
WARNING
When inserting the battery, make sure to
follow polarity indicated on the collar
3
03/04/2020 15:0
03/04/2020 15:0

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Pfabosti047

Tabla de contenido