BREIL CHRONO VD57 Manual De Instrucciones página 9

1. Pull out the crown to the first click, and turn it clockwise until the previous day's date
appears.
•
Do not set the date between 9:00 p.m. and 1:00 a.m. Otherwise, the date may not
change properly.
2. Pull out the crown to the second click when the second hand is at the 12 o'clock
positon. The second hand will stop on the spot.
3. Turn the crown clockwise until the desired date appears, and set the hour and minute
hands to the desired time.
•
When setting the hour hand, be sure to check that AM/PM is correctly set. The
watch is so designed that the date changes once in 24 hours. Turn the hands past
the 12 o'clock marker to determine whether the watch is set for the A.M. or P.M.
period. If the date changes, the time is set for the A.M. period. If it does not
change, the time is set for the P.M. period.
4. Push the crown back in to the normal position in accordance with a time signal.
Note: When setting the minute hand, first advance it 4 to 5 minutes ahead of the
desired time and then turn it back to the exact minute.
5