Connection and Installation
Parts for Connection and
Installation
Power supply leads (1)
Securing screw
7
11
(5 × 8 mm (
/
×
/
in)) (4)
32
32
Mounting bracket (1)
Mounting screw
(3 × 12 mm (
1
/
×
1
/
in)) (2)
8
2
This parts list does not include all the package
contents.
Mounting bracket (4)
Mounting screw
7
13
(5 × 20 mm (
/
×
/
in)) (4)
32
16
Securing screw
(2 × 5 mm (
3
/
×
7
/
in)) (2)
32
32
Double-sided tape (1)
Connection
Please read all the connection procedures carefully
before making any connections.
Power Connections
• This unit is designed for negative ground (earth)
12 V DC operation only.
• Do not operate the subwoofer on a weak battery
as the subwoofer requires a good power supply
for optimum performance.
• Before making any connections, disconnect the
ground (earth) terminal of the car battery to avoid
short circuits.
• Connect this unit to the +12 V power supply lead
only after all other leads have been connected.
• If your car is equipped with a computer system for
a purpose such as navigation, disconnecting the
ground (earth) lead from the car battery may
damage the computer memory. Leave the ground
(earth) lead connected and connect this unit to
the +12 V power supply lead only after all other
leads have been connected to prevent short
circuits.
5
GB