Spare Parts; Ordering Spare Parts; Recycling - Nederman FilterBox M Serie Manual De Usuario

If the FilterBox cannot filter out dust properly even
EN
with a new main filter, and after repeated cleaning,
the HEPA filter may need to be changed. The LCD dis-
play indicates when the HEPA filter needs to be re-
placed.
• Replace the HEPA filter according to Figure 14.
Check that the airflow is sufficient.
7 Spare Parts
CAUTION! Risk of equipment damage
Use only Nederman original spare parts and ac-
cessories.
Contact your nearest authorized distributor or
Nederman for advice on technical service or
if you require help with spare parts. See also
www.nederman.com.
7.1 Ordering spare parts
When ordering spare parts always state the following:
• The part number and control number (see the
product identification plate).
• Detail number and name of the spare part (see
www.nederman.com/en/service/spare-part-
search).
• Quantity of the parts required.
8 Recycling
WARNING! Risk of personal injury
• Wear goggles, dust mask, and gloves.
• Use proper equipment, such as a vacuum
cleaner, to clean the product before taking it
apart.
• Take apart the product in a well-ventilated
room.
• Clean the area properly after work is com-
plete.
The product has been designed for component mater-
ials to be recycled. Different material types must be
handled according to relevant local regulations. Con-
tact the distributor or Nederman if uncertainties arise
when scrapping the product at the end of its service
life.
24
FilterBox