Specific Safety Rules For Heat Guns - Black+Decker HG1300 Manual De Instrucciones

Pistola de aire caliente
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

g ) Use the power tool, accessories and tool bits, etc.
in accordance with these instructions, taking
into account the working conditions and the
work to be performed. Use of the power tool for
operations different from those intended could result
in a hazardous situation.
5) Service
a ) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.

Specific Safety Rules for Heat Guns

To reduce the risk of explosion, DO NOT use in paint spray
booths or within 10' (3.0 m) of paint spraying operations.
This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician. Do not
modify the plug in any way.
DO NOT USE THIS TOOL TO REMOVE PAINT
CONTAINING LEAD. The peelings, residue and vapors of
paint may contain lead which is poisonous
Hidden areas such as behind walls, ceilings, floors,
soffit boards and other panels may contain flammable
materials that could be ignited by the heat gun when
working in these locations. The ignition of these materials
may not be readily apparent and could result in property
damage and injury to persons. When working in these
locations, keep the heat gun moving in a back-and-forth
motion. Lingering or pausing in one spot could ignite the
panel or the material behind it.
NOTE: These heat guns are capable of producing
temperatures in excess of 1000˚ F
DO NOT use this tool as a hair dryer.
DO NOT use this tool to heat food.
DO NOT lay the heat gun on flammable surfaces when
operating the gun or immediately after shutting it off.
Allow the tool to cool before storing. Always set the gun on
a flat level surface so that the nozzle tip is pointed upward.
DO NOT use in the presence of explosive materials.
Keep moveable items secured and steady while scraping.
NEVER obstruct the air intake or nozzle outlet. This may
cause excessive heat build up resulting in damage to
the tool.
Be sure to direct the hot air blast in a safe direction; away
from other people or flammable objects.
DO NOT remove the heat barrel cover during use.
KEEP FINGERS AWAY FROM METAL NOZZLE; it
becomes very hot during use and remains hot for 30
.
minutes after use
Wear gloves to protect hands.
ALWAYS keep nozzle away from cord.
DO NOT touch the nozzle to any surface while running or
shortly after running.
DO NOT place anything inside the nozzle as it could
cause an electric shock. Do not look down the nozzle
while the unit is turned on due to the high temperatures
being produced.
Splinters and small particles of stripped paint can be
ignited and blown through holes and cracks in the surface
being stripped.
DO NOT apply heat to the same area for a long period
of time.
DO NOT burn the paint. Use the scraper provided and
keep the nozzle at least 1" (25 mm) away from the painted
surface. When working in a vertical direction, work
downwards to prevent paint from falling into the tool
and burning.
DO NOT allow paint to adhere to the nozzle or scraper. It
could ignite.
ALWAYS use good quality scrapers and stripping knives.
DO NOT use the heat gun in combination with chemical
strippers.
DO NOT use accessory nozzles as scrapers.
DO NOT direct heatgun airflow directly on glass. The
glass may crack and could result in property damage or
personal injury.
Maintain labels and nameplates. These carry
important information.
Place the heat gun on a stable, level surface when not
hand held. Place the cord in a position that won't cause
the heat gun to tip over.
Be constantly aware that this tool can ignite flammable
materials, soften or melt others. Regardless of the task you
are performing, shield or keep the heat gun away from
these materials.
You may occasionally notice some slight smoking of the
tool after it is turned off. This is the result of heating the
residual oil that was deposited on the heating element
during the manufacturing process.
Use eye protection and other safety equipment.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the tool. Keep cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
When operating a tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
Do not expose tools to rain or wet conditions. Water
entering a tool will increase the risk of electric shock.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the tool in
unexpected situations.
Store idle tools out of the reach of children and do
not allow persons unfamiliar with the tool or these
instructions to operate the tool
in the hands of untrained users.
English
.
Tools are dangerous
3

Publicidad

Tabla de contenido
loading

Tabla de contenido