Shuffle Playback - Teac PD-H380 Manual Del Usuario

To add a track to the program
1. In stop mode, press the PROGRAM button repeatedly until the
program number you want to insert a track/file appears on the
display.
2. Select a track/file number using the numeric buttons, then press
the PROGRAM button.
If you want to add a track to the end of the program, press the
PROGRAM button repeatedly until "P-End" briefly appears on the
display.Then select a track/file number using the numeric buttons
and press the PROGRAM button. The track/file is added to the
program.
To cancel the program mode
When the STOP button (H ) or the SHUFFLE button is
pressed in stop mode, program mode will be cancelled, but
the programmed contents aren't lost. You can return to the
programmed playback by pressing the PROGRAM button and the
PLAY button(G).
To clear the program
1. In stop mode, press the PROGRAM button.
2. Hold down the CLEAR button for more than 2 seconds.
If the open/close button (L ) is pressed, the programmed
contents will also be cleared.

Shuffle Playback

When the SHUFFLE button is pressed the tracks or files of the disc on
the USB memory device will be played randomly.
< If you press the SHUFFLE button or the STOP button (H) during
shuffle playback, the unit stops and the shuffle playback mode is
cancelled.
< If you press the / button during shuffle playback, next
track will be randomly selected and played. If you press the
.button, the currently played track/file will be played from
the beginning. A track/file cannot be replayed during shuffle
playback.
< The numeric buttons does not work during shuffle playback.
1