Laica HYDROSMART RK50A01 Instrucciones Y Garantía página 14

Ocultar thumbs Ver también para HYDROSMART RK50A01:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
EN
VENEZIA tap filter
thoroughly with cold drinking water. Do not use
aggressive detergents, solvents, chemical or abrasive
products. It is recommended to thoroughly clean the
entire connector each time the filter is changed.
For maintenance, remove the entire filtering system by
following the installation instructions in reverse order.
1) Rinse the connector under unfiltered running drinking
water.
Do not use detergents, solvents, chemical or abrasive
products to clean the connector.
If necessary, remove the fastening ring (E), the rubber
seal (F) and rinse the stainless steel strainer (G) under
running drinking water.
2) Use a small brush to remove any impurities which
may be present in the unfiltered water outlet and flush
everything under a stream of running drinking water.
3) Do not wash the connector or the HYDROSMART™
filter in the dishwasher.
REPLACING ANY DAMAGED PARTS
In the event of breakage or damage to the adapters, you
can purchase spare parts at authorised retailers (consult
the list of all the Laica authorised retailers on the website
www.laica.it). Then, dispose of the damaged components
as described in the paragraph "DISPOSAL PROCEDURE".
TROUBLESHOOTING
Problem
Possible cause Solution
The device does
The steel strainer
not dispense
is blocked by
unfiltered water
sediment
The device does
The filtering
not dispense
system has
filtered water
captured micro-
sediment in
the water and
become clogged
None of the
The tap is non-
adapters provided
standard size or
can be attached to
damaged
the tap
There is a leak
The adapter
between the
has not been
adapter and the
tightened
tap
sufficiently
No seal
There is a leak
The fastening
between the
ring has come
adapter and the
loose
connector
Sediment
between the
adaptor and the
connector
There are leaks
The filter has not
between the
been correctly
connector and the
assembled
HYDROSMART™
filter
The selector does
The connector is
not turn or work
damaged
Problem
The filtered water
has an unpleasant
taste
DISPOSAL PROCEDURE
- The HYDROSMART™ filter, which must be replaced
every 900L/3 months of filtered water, should be
disposed of as non-recyclable waste.
- The connector, only in the event it breaks, must be
disposed of as non-recyclable dry waste.
WARRANTY
This appliance is guaranteed for 2 years from the
date of purchase which must be proven by stamp
or signature of the retailer and by the receipt
which you must be careful to keep and that is
attached hereto. This period is in compliance with
the legislation in force ("Consumer Code" Legislative
Decree no. 206 of 06/09/2005) and only applies in the
case where the consumer is an individual.
The Laica products are designed for home use and
must not be used in public venues. The warranty only
covers manufacturing defects and does not apply if the
damage is caused by an accidental event, incorrect
use, negligence or misuse of the product. Use only the
Deinstall the
supplied accessories; use of other accessories may
connector and
clean the steel
cause the warranty to expire. Do not open the unit for
strainer
any reason; in the case of opening or tampering, the
warranty is definitively voided. This warranty does not
Replace the
apply to parts subject to wear or to the batteries when
HYDROSMART™
supplied.
filter
After 2 years from the date of purchase, the warranty
is voided; in this case, technical assistance will be
provided for a fee. Information on technical assistance,
whether under warranty or for a fee, can be requested
Use the adapter M
by contacting info@laica.com. No payment will be due
for repairs or replacements of products that fall within
the terms of the warranty. In the event of faults, contact
the retailer. Do NOT send the appliance directly to
Remove the
LAICA.
connector and fix
All the operations under warranty (including those of
the adapter using
replacement of the product or part thereof) will not
the appropriate
tool, then remount
prolong the duration of the original period of warranty
the connector
of the product replaced.
The manufacturer declines any liability for any damage
Insert the seal N
that may, directly or indirectly, be caused to persons,
property or animals as a result of the non-observance
Tighten the
fastening ring
of all the requirements established in the relevant
instructions manual and concerning, especially,
warnings relating to installation, use and maintenance
Remove the
of the product. Laica, in its constant commitment to
connector and
improving its products, is entitled to changing without
clean all the
any notice, in whole or in part, its products in relation
components
to production requirements, without this entailing any
Dismantle the filter
liability for Laica towards its dealers.
and reassemble
it following the
instructions
Replace the
connector
14
Possible cause Solution
The filter has not
Activate the
been correctly
filter again as
activated
described in the
paragraph "USING
THE FILTERING
SYSTEM"

Publicidad

Tabla de contenido
loading

Tabla de contenido