Kohler K-682 Guia De Instalacion página 18

12. Clean the Inlet Screens
Disconnect the power and turn off the water supply.
Disconnect the removable pipe segment.
Remove the screws and inlet clamp.
Remove the adapters from the valve inlets.
Gently pull the check valves from the valve inlets.
Remove the screens from the check valves.
Clean the screens to remove any dirt or debris.
Rinse or replace the check valves and screens.
Reassemble the inlet connections.
Troubleshooting
WARNING: Risk of electric shock. Disconnect power before servicing.
CAUTION: Risk of personal injury. The valve may contain hot water; be careful when draining
any residual water.
NOTICE: Valve maintenance should be performed by a KOHLER Authorized Service Representative.
NOTE: For service parts information, visit your product page at www.kohler.com/serviceparts.
This troubleshooting guide is for general aid only. For service and installation issues or concerns, call
1-800-4KOHLER.
1043183-2-E
Check Valve
Screen
O-Ring
Screw
18
Inlet Clamp
Adapter
Union Connection
Removable
Pipe Segment
Kohler Co.