Publicidad
Idiomas disponibles
Idiomas disponibles
Operation and maintenance
Remove all packaging of the device.
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage : AC220-240V 50Hz. Only connect this appliance to an earthed socket.
First use
Was the cover(no.2) thoroughly with hot water, use some detergent if required.
Attach the handle(no.1) on the cover with the supplied screw.
Clean the inside of the pizzapan with a damp cloth and dry them well.
Never immerse the appliance in water!
At the first use the applianse can spread some smell and smoke, this is normal.
Always place the device in a well ventilated area and on a stable surface.
Mounting base (no.5)
Step 1
Fold A and set it on a stable surface, see Figure 1
Figure 1
Step 2
Place Part B in Part A, see Figure 2. Be careful that
the top of Part B has the same direction as shown in
figure 2.
Figure 2
UK
Figure 3
C
Figure 4
Step 3
Part B is placed in Part A as shown in Figure 3.
Take part C and D and place the rack (E) in the
appropriate holes. Be careful that the tops of sections
C and D are in the same direction as shown in Figure
4.
E
D
Hole in Part C and D for fixing the rack (E).
Publicidad
