Tristar PZ-2974 Manual De Usuario página 7

Figure 5
Figure 7
Step 4
The rack is mounted in the parts C
and D as shown in Figure 5.
Place the rack with parts C and D
on the base. Slide the rack (E) to the bar of
the already assembled part (Figure 6) as the
arrows indicate.
Figure 6
Step 5
The base is ready for use, see Figure 7.
Insert the supplied thermostat in the
connection of the thermostat(no.4) and
place the pizzapan at the base.
Figure 8
Use
With the control knob of the thermostat you can set the desired temperature.
Position
0 UIT
1 110° C
2 150° C
3 200° C
4 230° C
5 280° C
The thermostat regulates a constant temperature. During baking, the temperature light turns
on and out, this is normal, the set temperature is constantly adjusted.
Set the desired position and add some olive oil or butter in the pizzapan, place your to prepare
pizza in the pan and put the lid on the pan. The coocking time depends on the ingredients and
the selected temperature.
The pizzapan is also extremely suitable as a snack pan for all kinds of dishes.
Never use sharp objects in the pan, it will damge the non-stick layer.
Cleaning of the device
Remove before cleaning the power cord from the wall outlet and wait until the device is fully
cooled. Never pour cold water in the pizzapan to the earlier cooling, this can damage the
device and can cause splashing hot water.
Clean the pizzapan with a mild detergent and a damp cloth
Never use harsh and abrasive cleaners, steel wool or a sanding sponge, which could damage
the non-stick layer. Never immerse the device in water or other liquid.
For a lower position turn
the knob to the right
.