Bluetooth Operation; Charging The Unit - Ibiza sound FREESOUND40-BK Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
USB/SD Operation
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could
generate interference. If the speaker stops working, switch it off and on again, or unplug USB/SD/MMC
card and re-plug it. The speaker should be back to normal status.
The maximum size of USB/TF device that can be connected is 32 GB.
Supported music formats: MP3, WMA
1. USB port: plug and play
2. TF slot: plug and play
3. Mode key: press to cycle through external AUX sound source/USB/TF card/FM/BLUETOOTH
4. Play/pause: Press to play, press to pause, press again to resume play.
5. Previous/Next: During play press once to go back to the beginning of the track or to the next track.
6. Repeat: During play press once to repeat the current song, press twice to repeat all songs.
FM RADIO FUNCTION
1. Turn on the unit and press repeatedly the MODE key on unit, or the MODE on remote control and select
FM function (the display will show the frequency).
2. Press the PLAY button on the unit or the key  on remote control to activate the auto memory (the
radio starts an automatic search for available radio stations and saves them automatically). The station's
number stored depends on the radio signal in your area.
During the search, press PLAY button on the remote control to stop searching.
3. Use the NEXT and PREV, or the  and  keys and on the remote control to listen to the various radio
stations saved in memory.
4. To change to a preset station, use the number keys on the remote control.
For example, to call up the station number 12, first press 1 and then 2.

BLUETOOTH OPERATION

1. Turn on the unit and press the MODE button on unit or on the remote control to select the Bluetooth
function. The display shows "BLUE".
2. In Bluetooth mode, the symbol
mode.
3. Activate the Bluetooth feature on the external device to be paired.
4. Initiate a search for devices. The device shows up as "FREESOUND 40".
5. Select it and enter the password "0000" if required.
6. Press the PLAY button on the unit or the   key on remote control, to start playing and the buttons
NEXT and PREV, or the keys  and  for the selection of songs.

CHARGING THE UNIT

This speaker has a high capacity 7.4V battery. Please use a 9V 1A power adapter for charging.
The power adapter has an indicator light that will illuminate when the speaker is on charge. It takes
around 6-8 hours to fully charge the speakers. Disconnect the power adaptor as soon as the battery is
fully charged.
Note: When the battery of the speaker is low, please charge it within 48 hours.
Specification
Speaker ................................................................................................. 4" Bass + 1.5" treble
Power ................................................................................................................... 20W max.
Power consumption......................................................................................................... 9W
Channel separation ..................................................................................................... >40dB
FM tuner ................................................................................................ 87.5MHz – 108MHz
USB ..................................................................................................................... MP3/WMA
©Copyright LOTRONIC 2016
on display will start flashing, the system automatically enters search
FREESOUND40
4

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Freesound40-si10-708110-7082

Tabla de contenido