Peg-Pérego After-Sales Service; Cleaning And Maintenance - Peg-Perego walk’n play jumper Instrucciones De Uso

PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001 certified company. This certification is a
guarantee for customers and consumers of the transparency and
trustworthiness of the company's procedures and working methods.
Peg Pérego can make changes at any time to the models described in this
publication for technical or commercial reasons.
Peg Pérego is at the disposal of its customers and consumers to ensure that all their demands
and queries are fully satisfied. It is a key part of our policy to ensure we are always aware
of our customers' views and requirements. We would therefore be very grateful if, after
using a Peg Pérego product, you take the time to fill in our CUSTOMER SATISFACTION
QUESTIONNAIRE, making a note of any comments or suggestions you might have. You can
find the questionnaire on the Peg Pérego website: www.pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of your Peg Pérego product should be accidentally mislaid or damaged, use
exclusively genuine original Peg Pérego replacements. For any repairs, replacements,
product information, and orders for genuine original replacement parts and accessories,
contact Peg Pérego After-Sales Service:
tel. 0039/039/60.88.213
e-mail assistenza@pegperego.it

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the weather: water, rain, or snow; prolonged and
continuous exposure to bright sunlight may give rise to colour changes of various different
materials; store this product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic parts with a damp cloth. Do not use
solvent or similar cleaning products; keep all metal parts dry to prevent rusting; keep moving
parts clean (adjustment mechanisms, locking mechanisms, wheels, ...) and free of dust and
sand and, if necessary, lubricate with light machine oil.
CLEANING PARTS IN FABRIC: brush the fabric parts to remove dust, then wash with a
damp cloth and neutral detergent; do not wring; do not use chlorine bleach; do not iron; do
not dry clean; do not use solvent-based stain removers and do not dry in a clothes dryer
with a rotating drum.
INSTRUCTIONS
1 TO FIT THE WHEELS: turn the Walk'n Play Jumper upside down. Insert the 4 wheels into
the slots, pushing downwards as in the figure.
2 TO FIT THE BACKREST: remove the rigid backrest from the lower part of the Jumper (fig_
a). Turn the Jumper upside down and insert the backrest into its housing (fig_b).
3 TO OPEN THE JUMPER: lift up the jumper as in the figure.
4 TO ATTACH THE SACK: position the padded sack as in the figure, making the sack clips
fax 0039/039/33.09.992
website www.pegperego.com