Product Overview; Product Components; Assemble The Probe Holder - Hach sensION+ pH3 Manual Del Usuario

This symbol, if noted on the instrument, references the instruction
manual for operation and/or safety information.
Electrical equipment marked with this symbol may not be disposed of
in European public disposal systems after 12 August of 2005. In
conformity with European local and national regulations (EU Directive
2002/98/EC), European electrical equipment users must now return old
or end-of-life equipment to the Producer for disposal at no charge to
the user.
Note: For return for recycling, please contact the equipment producer or supplier
for instructions on how to return end-of-life equipment, producer-supplied electrical
accessories, and all auxillary items for proper disposal.

Product overview

™
The sensION + meters are used with probes to measure various
parameters in water.
™
The sensION + PH3 meter measures pH, ORP (mV) or temperature.

Product components

Refer to Figure 1 to make sure that all components have been received.
If any items are missing or damaged, contact the manufacturer or a sales
representative immediately.
4 English
Figure 1 Meter components
1 Electrolyte for the probe
2 Buffer solutions (pH 4.01, pH 7.00
and pH 10.00)
3 Calibration beakers (with magnetic
bar inside)
4 Probe holder
Installation

Assemble the probe holder

Follow the numbered steps to assemble the probe holder and to connect
the magnetic stirrer.
5 Power supply
6 Rod with o-ring
7 Probe (included with kits only)
8 Meter