Use Of Hazard Information; Precautionary Labels; Product Overview - Hach SIP10 Instrucciones Para El Usuario

Please read this entire manual before unpacking, setting up or operating this equipment. Pay
attention to all danger and caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
Make sure that the protection provided by this equipment is not impaired. Do not use or install this
equipment in any manner other than that specified in this manual.

Use of hazard information

Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death or serious
injury.
Indicates a potentially hazardous situation that may result in minor or moderate injury.
Indicates a situation which, if not avoided, may cause damage to the instrument. Information that requires special
emphasis.

Precautionary labels

Read all labels and tags attached to the instrument. Personal injury or damage to the instrument
could occur if not observed. A symbol on the instrument is referenced in the manual with a
precautionary statement.
This symbol, if noted on the instrument, references the instruction manual for operation and/or safety
information.
Electrical equipment marked with this symbol may not be disposed of in European domestic or public
disposal systems. Return old or end-of-life equipment to the manufacturer for disposal at no charge to
the user.

Product overview

The SIP 10 sipper kit for the TU5200 turbidimeter is used to pull a selected quantity of a water
sample through the flow-thru head of the TU5200 before each turbidity measurement. Refer to
Figure 1. If selected, the sipper pulls a selected quantity of a user-supplied rinse agent through the
flow-thru head after each turbidity measurement.
4 English
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E