Sennheiser ew 300 IEM Instrucciones Para El Uso página 43

Basic functions of the Sennheiser operating menu
A special feature of the Sennheiser evolution wireless system ew 300 IEM is
the similarity of the operating controls of both transmitter and receiver. In
stressfull situations, for example on stage or during a live show or presentation,
it is important that the devices are easy to operate and that adjustments to
the settings can be made quickly and instinctively. Therefore, the necessary
operating steps for each device are similar.
Important:
With the buttons you can directly switch between the factory-
/
preset frequencies (channel presets). The display starts flashing. Your
selection becomes effective immediately.
Press the SET button to enter the top menu level:
By briefly pressing
After approx. one second, the selected menu appears on the display
and then the current setting of the menu is indicated.
Press the / buttons to adjust the settings of the selected menu:
The new setting starts flashing on the display. If you return to the
previous setting, the flashing stops.
Important:
New settings become effective immediately and will be
retained in memory on switch-off!
N.B.: When changing transmitter frequencies, care should be
taken to avoid causing interference to other channels/users.
In the "TUNE" and "NAME" menu, the / buttons feature a "fast
search" function. By briefly pressing the
jumps either forwards or backwards to the next setting. If you hold
down a button, the cycling of the display is continously accelerted. If
you release the button and start over again, the cycling of the display
restarts at normal speed. The "fast search" function allows you to get
fast and easily to your desired setting.
Press the SET button to return to the top menu level:
Have you finished your entries? Press the
top menu level. The display then switches back to the standard setting.
SET again, you can change to the next menu.
SET
/ buttons, the display
button to return to the
45