Sennheiser ew 300 IEM Instrucciones Para El Uso página 49

Ocultar thumbs Ver también para ew 300 IEM:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 88
Configuring a channel preset
Transmitter and receiver of the evolution wireless system ew 300 IEM have
8 switchable frequencies (channel presets) respectively to store up to 8 trans-
mission/receiving frequencies. With the SR 300 IEM transmitter, you can
additionally assign a name.
DISPLAY
DISPLAY
You can switch directly between the channel presets (u "Selecting the
frequency, channel number").
TUNE
Setting the transmission/receiving frequency
tune
Transmission and receiving frequencies are tunable in 25-kHz steps within a
switching bandwidth of 32 MHz max.
Special notes on multi-channel operation:
Several devices of the Sennheiser evolution wireless system ew 300 IEM can be
used simultaneously on different frequencies. The factory-preset frequencies are
intermodulation-free. Before you program new frequency combinations, please
refer to the information on the correct frequency choice given in the planning
brochure "Practical Applications in RF Technology" available from your
local Sennheiser agent.
TUNE
Frequency
Frequency
CH NO
Channel No. 1
Channel No. 2
NAME
Name
1
Select the channel preset for which you wish to set a frequency.
Select the "TUNE" menu by pressing the
appears on the display; after a short pause the currently set frequency
is displayed.
With the
buttons you can now select a different frequency. The
/
frequencies are tunable in 25-kHz steps. The new frequency starts
flashing on the display and becomes effective immediately.
Press the
SET
button to return to the top menu level. The display
then switches back to the standard display.
TUNE
TUNE
Frequency
CH NO
CH NO
Channel No. 3
NAME
NAME
Name
Name
3
2
SET
TUNE
Frequency
CH NO
Channel No. 8
NAME
Name
...
8
button until "TUNE"
51

Publicidad

Tabla de contenido
loading

Tabla de contenido