Reverse Door - Domo DO924DV Manual De Instrucciones

4. Retirez la vis du bas, le support de charnière et le pied réglable du bas de l'appareil.
hinge. Then remove the adjustable feet from both

Reverse Door

Détachez la goupille de la charnière-étrier. Retournez l'arceau, puis fixez la goupille.
5.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
oor
move the bottom hinge pin, turn the bracket over and replace it.
oor
move the bottom hinge pin, turn the bracket over and replace it.
Unscrew
6. Refit the bracket fitting the bottom hinge pin. Replace both adjustable
Fixez les vis, le support de charnière et le pied réglable sur le côté opposé. Sécurisez la
6.
feet.
fixation sans trop resserrer.
Unscrew
fitting the bottom hinge pin. Replace both adjustable
fitting the bottom hinge pin. Replace both adjustable
7. Place the door back on. Ensure the door is aligned horizontally and
vertically, so that the seals are closed on all sides before finally
tightening the top hinge.
7. Remettez soigneusement la porte en place. Avant de resserrer la charnière upérieure,
ack on. Ensure the door is aligned horizontally and
assurez-vous que la porte est alignée horizontalement et verticalement de sorte que les
t the seals are closed on all sides before finally
p hinge.
joints soient scellés sur tous les côtés. Insérez la charnière et vissez-la sur le haut.
ack on. Ensure the door is aligned horizontally and
t the seals are closed on all sides before finally
8. Put the top cover and fix it with 2 screws on the back.
p hinge.
r and fix it with 2 screws on the back.
Remettez le couvercle supérieur en place et fixez-le de nouveau avec les vis.
8.
r and fix it with 2 screws on the back.
9. Fix the thermostat knob.
20
DO924DV
at knob.
7
Unscrew
Screw
Screw
screw
screw
Screw
screw