Domo DO924DV Manual De Instrucciones página 76

s unplugged and empty.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
slip during the door reversing process.
oor
s unplugged and empty.
d must be saved to do the reinstallation of the door.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
it flat as this may damage the coolant system.
slip during the door reversing process.
2 people handle the unit during assembly.
oor
Odskrutkujte 2 skrutky z hornej strany krytu.
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner. 1.
d must be saved to do the reinstallation of the door.
it flat as this may damage the coolant system.
s unplugged and empty.
2 people handle the unit during assembly.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
lips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
slip during the door reversing process.
ews at rear side of top cover.
d must be saved to do the reinstallation of the door. s unplugged and empty.
it flat as this may damage the coolant system.
off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
2 people handle the unit during assembly.
slip during the door reversing process.
ews at rear side of top cover.
d must be saved to do the reinstallation of the door.
it flat as this may damage the coolant system.
2 people handle the unit during assembly.
ews at rear side of top cover.
ews at rear side of top cover.
Z mrazničky odskrutkujte horný kryt aj s kontrolkou teploty.
2.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
er and thermostat knob, then place it aside.
ge and then remove door and place it on a soft pad to
ge and then remove door and place it on a soft pad to
Odskrutkujte skrutky, ktoré držia horný pánt dverí. Dvere nadvihnite a položte ich na
3.
mäkký povrch, tak aby sa predišlo poškriabaniu.
ge and then remove door and place it on a soft pad to
ge and then remove door and place it on a soft pad to
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
hinge. Then remove the adjustable feet from both
Odskrutkujte spodný skrutky pántu, zložte záves pántu aj nastaviteľnú prednú nôžku.
4.
hinge. Then remove the adjustable feet from both
Povoľte závesný kolík pántu, vyberte otočte a kolík opäť dotiahnite.
5.
76
DO924DV
7
7
7
7
unscrew
unscrew
unscrew
unscrew