Basic Instructions; User Manual - PNI PG06 Manual De Usuario

EN
SPECIFICATIONS
• Power supply: 3V, 2 x AAA batteries
• Current: in alarm state ≤ 160mA
• Wireless standard: 802.11b / g / n
• Alarm distance between sensor and magnet: ≥15 mm
• Working temperature: -10 ~ +60°

BASIC INSTRUCTIONS

Connecting to the WiFi network
1. Push up the bracket on the back of the sensor and install the batteries in the dedicated
compartment.
2. Search in Google Play or AppStore for TuyaSmart app or scan the QR code below. After
installation, open the application and register.
3. In the main interface of the application, press "Add device" or "+" in the upper right corner
4. From the list of devices, select "Security & Sensors" → "Sensor (Wi-Fi)"
5. Using a sharp object, reset the sensor by pressing and holding the Reset button for 5 seconds.
6. The LED on the sensor flashes to indicate that it has entered the connection mode
7. Select the WiFi network and enter the password
8. Wait for the sensor to connect.
2
Android iOS

User manual