AEG SBE 600 R Instrucciones De Uso página 3

Measured sound
value
Measured
vibration value
Brief description
Fully insulated metal gear box for durability and
protection from electric shock.
Bit reception – it is possible to fit drill bits directly
into the working spindle.
(not for SB2–700)
Keyless chuck for tightening
without a key.(according to standard
equipment)
Gear lever for switching between 1st and 2nd
gear.(not for SBE 600 R)
Auxiliary handle, has an integral depth gauge
and can be rotated in various positions.
Reversing lever for changing from forward to
reverse rotation – due to a lockout mechanism,
switching the lever is only possible if the On-/Off
switch is not depressed. (not for SB2–700)
Adjuster wheel for speed presetting
(not for SB2–700)
Built-in safety clutch helps prevent the
machine from rotating if the drill bit jams.
(only applicable for SB2E 700 RS, SB2E 705
PLUS)
ENGLISH
Typically the A-weighted noise levels of the tool are:
Sound pressure level = 92 dB (A). Sound power level = 105 dB (A).
Wear ear protectors! Measured values determined according to EN 50 144.
Typically the weighted acceleration is 12 m/s
Measured values determined according to EN 50 144.
Selector lever for switching between
drilling and percussion drilling.
Modifications: Text, diagrams and data are correct at the time of printing. In the
interest of continuous improvement of our products, technical specifications are
subject to alteration without prior notice.
2
SBE 600 R, SB2E 680 R, SB2-700, SB2E 700 R, SB2E 700 RS, SB2E 705 PLUS, SB2E 750 R, SB2E 760 R
2
.
2
1
Three jaw chuck
(according to standard
equipment)
Lock button for switch locking
Ergonomically designed
housing with soft grip.
Bit storage for
compartment
screwdriver bits
Switch trigger for switching
the machine on and off, and
for smooth starting and
varying speed.
1