Listening To Music From The Media Server; Using The Sherwood Remote Application; Preparing For The Application - Sherwood R-807 Instrucciones De Funcionamiento

R-807 NETWORk AV RECEIVER

listening to music from the media Server

1
Start your computer.
2
Select NETWORk as an input source.
• On the main unit, rotate INPUT SElECTOR.
• On the remote control, press NETWORk.
INPUT SElECTOR
3
Select media Server on the screen, and then
press ENTER on the remote control.
4
Select the desired category by pressing  and ,
then press ENTER on the remote control.
34
5
Repeat step 3 above until the desired music file
is selected.
The playback functions are the same as those
for USB. Refer to ** for details on playback.
Using the Sherwood Remote
Application

Preparing for the Application

Setting the Network on the System
1
Select NETWORk as an input source.
• On the main unit, rotate INPUT SElECTOR.
• On the remote control, press NETWORk.
INPUT SElECTOR
2
Press SETUP on the remote control.
3
Tap Hotspot & Wi-Fi Direct > Soft Wi-Fi
hotspot or Wi-Fi direct.
Note
• Wi-Fi hotspot is enabled as a default connection
setting.