Hands Free Use (Vox); Vibrate - Motorola T5622 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
6864227V01-A_EN.fm Page 9 Thursday, April 6, 2006 2:37 PM
2.To restore the channel to the scan list, turn the radio
off and then on.
3.You cannot remove your home channel from the
scan list (your home channel is the channel your
radio was set to when you activated scan).

Hands Free Use (VOX)

VOX allows you to talk
"hands free" when used
withoptional accessories
connected to the radio.
Note: When using audio
accessories with your
radio, turn the volume
of your radio down
before you place the
accessory on your
head or in your ear.
How To Use The VOX Feature
1.Switch off your radio.
2.Open the accessory cover and insert the audio
accessory into the accessory jack.
3.Switch on your radio. The flashing
g
icon will
appear in the display to indicate that the VOX feature
is active.
4.To transmit, speak into the accessory microphone.
To receive, stop talking.
5.Pressing
M
or removing audio accessory will dis-
able VOX operation.
Note: There is a short delay after you start talking,
before the radio transmits.
Setting the Sensitivity Level
Adjusting the VOX and/or microphone sensitivity level
helps to minimize the possibility of unintended noises
triggering a transmission, or enhances the ability to pick
up quiet voices.
If an accessory is fitted to your radio these instructions
will help you to adjust the VOX sensitivity. If no
accessory is fitted the microphone sensitivity will be
adjusted.
g
1.Press
\
until
and a flashing number appear in
the display.
2.Select sensitivity level of 1, 2 or 3 by using
.
[
1 - If you speak loudly, or are in a noisy environment.
2 - Suitable for most applications.
3 - If you speak softly, or are in a quiet environment.
Note: When you connect a VOX accessory, the radio
will automatically be set to the last chosen VOX
sensitivity level.

Vibrate

Your radio can be set to vibrate when it receives a call.
Vibrate is then suspended until 30 seconds after
channel activity has finished.
i
1.Press
\
until
is displayed
2.Press
]
or
[
to select the
Y
or
<
.
or
]
9

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido