Features (Normal Mode); How To Change Channels; Call Tones; Hands Free Use (Vox) - Motorola XTN446 Manual De Instrucciones

FEATURES (NORMAL MODE)

How To Change Channels

Press ] or [ to select the desired channel.
Briefly pressing T or S will change the channel to the one which
has been pre-set to that button.

Call Tones

Your radio can transmit call tones to other radios in your group so you
can alert them that you are about to talk. Once the call tone is set,
press B to transmit the call tone to others. There are three unique
call tones to choose from, or you can choose to turn the call tones
off.
1. To set the call tones, press \until E shows in the display.
2. Choose a call tone from the three available. If you choose 0 then
the call tones are off.
3. Press M briefly to exit.

Hands Free Use (VOX)

This feature allows you to activate your radio's transmitter by using
your voice instead of pressing the M button. You can use the radio
alone, in hands free mode, or use a Motorola authorised optional
audio accessory.
Note: When using audio accessories with your radio, we recommend
that the volume level be kept at a comfortable listening level.
Before you place the accessory on your head or in your ear,
turn your radio's volume down.
9 English
How To Use The VOX Feature Without An Accessory
1. Switch on your radio with M pressed. g will appear in the display
to indicate that the VOX feature is active.
2. To transmit, speak into the microphone. To receive,
stop talking.
3. To exit hands free mode temporarily, briefly press M. The g icon
will flash.
4. Briefly press M to re-enter hands free mode.
How To Use The VOX Feature With An Accessory
1. Switch off your radio.
2. Open the accessory cover and insert the audio accessory into the
accessory jack.
3. Switch on your radio. The g icon will appear in the display to
indicate that the VOX feature is active. If the g icon is flashing,
VOX is disabled in the Sensitivity menu (see below – change
setting to 1, 2, or 3 to enable VOX operation).
4. To transmit, speak into the accessory microphone. To receive,
stop talking.
5. To exit hands free mode, press M.
Note: There will be a brief delay between when you start talking and
the radio going to transmit, and a longer delay between when
you stop talking and the radio going back to receive, to allow
for speech pauses.

Microphone And VOX Sensitivity

The sensitivity of your radio's microphone and VOX can be adjusted
to cater for loud or quiet environments, and for users who speak
loudly or softly.