Custom; Custom Cycle Record - Alliance Laundry Systems T433I Operación / Mantenimiento / Programación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Custom

Frequently used cycles can be saved in the control's
memory as Custom cycles. Only one cycle can be
saved for each fabric type.
Create an Automatic, Time Dry, Special, or Special
Time cycle and save them by pressing the word
CUSTOM before pressing START. To change a
Custom cycle, repeat above.
To recall and use a Custom cycle, press its
ON/SELECT pad twice. Press START.

Custom Cycle Record

Select
Dryness Level
HIGH
MED
MED LOW
LOW
NO HEAT
Select
Dryness Level
HIGH
MED
MED LOW
LOW
NO HEAT
M414462
Automatic
Cool Down
Special
Cool Down
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming the Electronic OPL Control
During Custom cycles the display is the same as non-
Custom Automatic cycles. The CUSTOM status light
will be on.
When creating or changing a Custom cycle, record it
on a Custom Cycle Record, refer to sample at bottom
of page. To modify or fine-tune a Custom cycle, its
values must be known. Custom cycle values can be
extracted from the micro-control, but it is easier and
more permanent to use a Custom Cycle Record.
Time
Dry
Cool Down
Special Time
Dry
Cool Down
Temp
Load Type
Temp
Load Type
23

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

T477cT478cT012c

Tabla de contenido