Important Safeguards - Sinbo SS 4028 Manual Del Usuario

ENGLISH

IMPORTANT SAFEGUARDS

Before using the product, please read carefully the operating instructions and
keep properly for future reference.
1. Only the included charger can be used.
2. The charger can transform 230V to a safe low voltage below 24V.
3. The charger includes a transformer which should not be cut off and replaced
with another plug; otherwise, it will lead to serious results.
4. If the charger is damaged, it should be replaced with a new one with the
original type to avoid the danger.
5. Out blade is made of super thin alloy. To avoid of breakage, please do no
press it by hand (Fig 1).
6. The temperature for the product's charge and storage should not exceed
5˚C -35˚C.
7. Make sure the charge will not become damp (Fig 2).
8. Do unplug the charger before cleaning the shaver with running water. Do
be careful when using hotwater. Do remember to check the water is not too
hot to avoid doing harm to hands (Fig 3).
9. The waterproof grade IPX4.only the shaver head can be washed and the
body should not be soaked in water.
10.This product cannot be used by physically distempered, sensorially or
mentally disordered, or inexperienced persons (including children), unless
they are under supervision or instruction by people in charge of their security.
11.Take care of children to keep them away from this product.
12. Pis clean inside beard if the shaver can not work after you pressthe switch.
13. When the shaver is charging, the indicator lamp will be off. Press the
switch button back to the off state for charge.
14. It's necessary to ensure to put the protective cover on the shaver when
you travel to protect the shaver head.
CHARGING
Make sure the product is power-off before the charge. The charge lasts about
16 hours. Keep use about 30 minutes after full charge.
It's better for the product not to be connected to the power supply for more
than 24 hours. It can not connect with alternating current.
- 9 -